DC TRANSMITTER BATTERY BACK-UP : 10x4 : OV-6050

Optivision Model no.6050 is 3-in-1 Optical Transmitter cum optical receiver. Its give both RF as well as optical output. The Transmitter function in this model is designed to give 10dBmx4out optical output where network have only lower optical there. This model is economical for small and big networks. The transmission of optic signal at 1310nm and (optional)1550nm for carry multi analog and digital channels CATV transmission. This optivision transmitter have AGC & MGC (manual gain control) for easy to handle RF input signal. The optivision transmitter is constructed with SMD technology to give high quality enable it to meet or exceed its performance. Its is operated with 12VDC power supply and have very low power consumption.

Technical Specifications: DC Transmitter with Battery Backup (3-in-1)

Model No.: OV-6050
Brand: OPTIVISION

---

1. General Overview

• Product Name: DC Transmitter with Battery Backup (3-in-1)

• Model Number: OV-6050

• Description: A versatile 3-in-1 DC transmitter with a built-in 15-hour battery backup system. The device supports multiple signal conversion modes:

  1. Optical In and Optical Out

  2. RF In and Optical Out

  3. Optical In and RF Out

• The transmitter operates on a 12V DC power adapter and delivers a stable RF output power of 10dBm. It features four output ports for flexible connectivity.

---

2. Electrical Specifications

• Input Voltage: 12V DC (Range: 11.5V - 12.5V DC)

• Power Consumption: 3W (typical)

• RF Output Power: 10dBmx4 (1dBm)

• Frequency Range: 40 MHz - 1000 MHz (Customizable upon request)

• Output Impedance: 75 Ohms

• Output Ports: SC-APC 

• Battery Backup: 15 hours (under full load)

• Battery Type: Rechargeable Lithium-ion (Li-ion)

• Battery Capacity: 2600mAh

• Charging Time: 6 hours (from 0% to 100%)

• Battery Life: 750 charge cycles (minimum)

---

3. Signal Conversion Modes

1. Optical In and Optical Out:

   • Optical Input: SC/APC connector

   • Optical Output: SC/APC connector

   • Wavelength: 1310nm or 1550nm (selectable)

2. RF In and Optical Out:

   • RF Input: F Female ( 75 ohms )

   • Optical Output: SC/APC connector

   • Wavelength: 1310nm or 1550nm (selectable)

   • Optical Power:  +10dBm x 4

3. Optical In and RF Out:

   • Optical Input: SC/APC connector

   • RF Output:  F Female ( 75 ohms )

   • RF Output Power: 98db

---

4. Environmental Specifications

• Operating Temperature: -20C to +60C

• Storage Temperature: -30C to +70C

• Humidity: 5% to 95% (non-condensing)

• Ingress Protection (IP) Rating: IP54 (Dust and splash resistant)

---

5. Mechanical Specifications

• Dimensions: 160mm x 110mm x 55mm (L x W x H)

• Weight: 550g (including battery)

• Enclosure Material: Aluminum alloy (anodized finish)

• Mounting: Wall-mountable or desktop placement

---

6. Performance Specifications

• Signal Stability: 0.5dBm over the entire operating temperature range

• Harmonic Distortion: -30dBc

• Spurious Emissions: -40dBc

• Output Port Isolation: 20dB between ports

---

7. Battery Backup System

• Backup Time: 15 hours (at full load)

• Battery Management System (BMS): Overcharge, over-discharge, and short-circuit protection

• Battery Indicator: LED indicators for battery status (Green: Charged, Red: Low battery)

• Automatic Switchover: Seamless transition to battery power during power failure

---

8. Connectivity

• Input Power Connector: DC Jack (5.5mm x 2.1mm)

• Optical Connectors: SC/APC (Input and Output)

• RF Connectors: Female 75ohms

9. Accessories

• Included Accessories:

  • 1 x 12V DC Power Adapter

10. Warranty and Support

• Warranty Period: 1 years (limited warranty)